Help
Printing
Printing these pages will depend on your
default printer and web browser software. For best results
please try one of the following:
- Go to 'Print Preview' under 'File'
in your web browser and select 'Shrink pages to fit'.
- Otherwise go to 'File' select 'Page
set up' and click on 'Properties'. Set the left and right
margins to '0'. This should allow the page to fit on an
A4 width.
There is a hard copy printed version of
this catalogue available. To order, please call 01206 792001
or visit www.lintels.co.uk
Navigating
|
OUTER leaf - brick,
block or stone, minimum and maximum width. Use WOfeature
to increase maximum to 150mm. |
LINTEL CODE |
The maximum width of
the CAVITY and the INNER. This must not be exceeded
in order to comply with NHBC regulations. Note:
HD4 always has an inner block width of 100mm, revert
to required block width above lintel. |
SCALE DRAWING |
FULLY INSULATED |
OPTIONAL FEATURES - These features allow comprehensive
and easily specified variations to basic designs.
- LINTRAY
- FEATURE BRICK
- STEP - Standard 20mm, can vary e.g. ST100
-See examples 1 and 2
- FLAT BASE - No Plaster Key. See example.
- CANT OUTER - Standard 50mm, can vary e.g.
- C60 - See example.
- WIDE OUTER leaf - Standard 125mm, can vary
e.g. WO115 - See example.
|
PHYSICAL & STRUCTURAL
PROPERTIES |
SAFE UDL - Indicates
the Safe Uniformly Distributed Load shown in kN.
It is generally advisable to use lintels with an
Outer to Inner ratio of 1:5 (Standard Range), to
support masonry and domestic timber floors, and
lintels with a ratio of 1:19 (Medium and Heavy Duty
range), to support masonry and concrete floors or
highly loaded eaves applications. If support for
point loads is required, please consult our Technical
Department. |
Lintel Length - Allowing
150mm bearings. Click here
for Lintray bearings |
Opening size |
Longer lintels displayed in red |
|
This website is copyright,
the Copyright being owned by Harvey Lintels Limited
and the unauthorised reproduction of the whole or
part of it is prohibited. In keeping with our policy
of continuous product improvement, we reserve the
right to change or modify lintel designs as necessary,
subject to overall performance not being less than
as specified in this website. |
|
|